Q: Why does my stainless steel equipment look as though it is rusting?
A. Stainless steel resists rust and will stain “less” than other types of steel. What may appear to be rust is actually surface corrosion. When stainless steel comes in contact with chloride (which is found in seawater) or chlorine (which is used in swimming pools), the protective chromium oxide layer gets penetrated and allows corrosive attack to occur. Thoroughly rinsing all your equipment with fresh water after use in salt water or chlorinated water is the best way to prevent corrosion.
Stainless Steel Cleaning and Maintenance (source: www.recreonics.com)
Stainless steel is a corrosion resistant chromium/nickel alloy steel that is strong and durable with excellent luster. However, it is not rustproof, particularly in the harsh environment of a swimming pool. Chlorine and bromine used for sanitization are highly caustic chemicals for stainless steel and heat and humidity enhance the corrosiveness of these chemicals. Regular cleaning is the best way to prevent corrosion and add to the service life for your railings, starting platforms, guard chairs and any other stainless steel equipment. The goal of your cleaning and maintenance program should be to keep the stainless steel's protective chromium oxide layer intact. This is what prevents corrosion.
General Cleaning and Maintenance Suggestion for Stainless Steel
Rinse off stainless steel pool equipment frequently with fresh water to wash away accumulated chemicals such as chlorine and wipe dry with a clean cloth. Especially try to clean equipment immediately after use around chlorides (chlorine powder, seawater, etc.)
Clean frequently with a cleaner and water. Any cleaner that is safe for glass is usually safe for stainless steel.
Inspect equipment frequently, if you notice discoloration, tarnish or water stains, increase the frequency of your fresh water rinses to reduce accumulated chemicals.
Remove any rust spots as soon as possible to prevent irreversible pitting.
Occasionally clean with borax, soda ash, or a non-abrasive commercial cleanser and water. Stubborn stains may be removed with a magnesium oxide, ammonia and water paste.
Consider the following periodic cleaning program:
1 can of powered cleanser
1 Scotchbrite pad
1 spray bottle cleaner
1 paste automotive wax
Wet cleaning pad with fresh water (do not use pool water) and apply powered cleanser. Using gentle pressure, rub stained areas in the same direction of the existing polishing grain until stains are removed. Rinse with clean water. Use cleaner de-greaser to remove any stains. Thoroughly dry the stainless then apply wax. Let wax dry to a haze and buff to a shine with a clean dry cloth. Automotive waxes will provide added beauty and protection for your equipment.
Advanced Cleaning for Stainless Steel
Discoloration, Tarnish or Water Stains: